YD Type Oil-Steeped
YD Oil- fled electric drum is the introduction of foreign oil electric roller proprietary technology design, production andcurrently more advanced in domestic market. The motor of the drum applies oil immersed directly cooled, high efficiency, smallsize,
> YD Type Oil-Steeped Parameters Table
Drum Dia.D | Power P | Velocity of drum surface V | Minimum tube length | Series minimum tube length | 50mm Mass | |
mm | kw | (m/s) | mm | 长度mm | 质量kg | kg |
Ø110 | 0.12 | 0.14,0.16,0.20,0.25,0.57,0.63,0.80 | 310 | 350 | 12 | 0.8 |
0.25 | 0.04,0.047.0.05.0.055.0.06.0.065.0.07.0.075.0.08 .0.09.0.10.0.12.0.152.0.20 | 350 | 350 | 16 | 1.1 | |
0.25,0.30,0.32,0.34.0.38.0.44.0.53 | 320 | 350 | ||||
Ø130 | 0.25 | 0.046,0.056,0.065,0.07,0.08,0.10,0.13.0.15.0.18.0.226 | 350 | 350 | 17 | 1.5 |
0.29.0.35.0.40.0.45.0.52.0.63 | 320 | 350 | ||||
0.55 | 0.046,0.056,0.058.0.068.0.071.0.08.0.09.0.10.0.12.0.14 | 400 | 400 | 19 | 1.5 | |
0.29.0.35.0.40.0.45.0.52.0.63 | 370 | 400 | ||||
Ø174 | 0.75 | 0.03.0.04.0.05.0.063.0.08.0.10.0.13.0.16.0.20 | 470 | 500 | 50 | 2.3 |
0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60.2.00 | 400 | 400 | 40 | |||
Ø216 | 0.75 | 0.05.0.063.0.08.0.10.0.13.0.16.0.20.0.25 | 470 | 500 | 70 | 3.0 |
0.32.0.40.0.50.063.0.80.1.00.1.25.1.60.2.00.2.50 | 400 | 400 | 60 | |||
1.1 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00 | 410 | 450 | 63 | ||
1.5/2.2 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00 | 460 | 500 | 69 | ||
3 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00 | 510 | 550 | 73 | ||
Ø240 | 0.75 | 0.056.0.07.0.089.0.11.0.14.0.18.0.22.0.28.0.36 | 470 | 500 | 80 | 3.3 |
0.44.0.56.0.70.0.89.1.11.1.39.1.78.2.22.2.78 | 400 | 400 | 70 | |||
1.1 | 0.14.0.18.0.22.0.28.0.36.0.44.0.56.0.70.0.89.1.11.1.39 | 410 | 450 | 70 | ||
1.5/2.2 | 0.14.0.18.0.22.0.28.0.36.0.44.0.56.0.70.0.89.1.11.1.39 | 460 | 500 | 78 | ||
3 | 0.14.0.18.0.22.0.28.0.36.0.44.0.56.0.70.0.89.1.11.1.39 | 510 | 550 | 81 | ||
Ø320 | 1.1 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25 | 420 | 450 | 120 | 3.7 |
1.5/2.2 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25 | 470 | 500 | 126 | ||
3 | 0.13.0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25 | 520 | 550 | 132 | ||
4 | 0.25,0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60.2.00.2.50 3.15 | 560 | 600 | 150 | ||
5.5 | 0.25,0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60.2.00.2.50 3.15 | 560 | 600 | 155 | ||
7.5 | 0.50.0.63.0.80.1.00.1.25.1.60.2.00.2.50.3.15 | 660 | 700 | 160 | ||
Ø400 | 1.1 | 0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60 | 420 | 450 | 140 | 5.5 |
1.5/2.2 | 0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60 | 470 | 500 | 145 | ||
3 | 0.16.0.20.0.25.0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60 | 520 | 600 | 152 | ||
4 | 0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60.2.00.2.50.3.15 | 560 | 550 | 170 | ||
5 | 0.32.0.40.0.50.0.63.0.80.1.00.1.25.1.60.2.00.2.50.3.15 | 560 | 650 | 175 | ||
7.5 | 0.63,0.80.1.00.1.25.1.60.2.00.2.50.3.15.4.00 | 660 | 750 | 190 |
> YD Type Oil-Steeped Installation and dimensions
Note: the installation center is A=L+2f+c away from the center. With bearings, A is the center distance between the two bearings; without bearings, A is the center distance between the two ends of the shaft head.
Drum Dia.D(mm) | a | b | c | d | e | f | g | h | s |
Ø110 | / | / | 20 | 25 | 21 | 5 | / | / | / |
Ø130 | / | / | 20 | 25 | 21 | 5 | / | / | / |
Ø174 | 120 | 160 | 60 | 32 | 25 | 5 | 105 | 50 | 15 |
Ø216 | 120 | 160 | 60 | 38 | 30 | 5 | 105 | 50 | 15 |
Ø240 | 120 | 160 | 60 | 38 | 30 | 5 | 105 | 50 | 15 |
Ø320 | 210 | 260 | 60 | 42 | 35 | 10 | 120 | 95 | 19 |
Ø400 | 210 | 260 | 60 | 42 | 35 | 10 | 120 | 95 | 19 |
Notes: The mounting size of the motorized drum which power is 0.75KW,drum diameter is 216mm or 240mm is the same as the mounting size of themotorized drum which drum diameter is 174mm.